The PMD Clean Pro is a silicone brush system designed for gentle, effective facial cleansing and exfoliation. This guide explains how to use the PMD Clean Pro correctly, switch brush heads, and integrate it into a simple skincare routine for best results.
Quick Answer
Cleanse twice daily with the silicone brush for 60 seconds, using light, circular motions. Replace the brush head every few months and switch to the exfoliating silicone brush head when needed for deeper exfoliation, then finish with your regular skincare products.
What You’ll Need
- PMD Clean Pro facial cleansing device silicone brush
- PMD Clean Pro replacement brush heads silicone
- PMD Clean Pro USB rechargeable facial cleansing device
- PMD Clean Pro exfoliating silicone brush head
- PMD Clean Pro skin care routine kit
Before You Start
Charge the device fully using its USB charging cable before first use. Inspect brush heads for wear; never use a damaged head. Clean the device with a damp cloth after use and store in a dry place away from direct sunlight. Time estimate: 5–10 minutes for setup, plus the 60-second cleansing routine. Caution: avoid applying excessive pressure, which can irritate the skin, especially around delicate areas like under the eyes.
Step-By-Step: How To Use PMD Clean Pro
- Attach the silicone brush head (standard) to the PMD Clean Pro and ensure it clicks securely.
- Apply a small amount of your cleanser to damp skin or directly onto the brush head.
- Power on the device and select your preferred speed, typically a gentle setting for daily use.
- Begin at the forehead and use small circular motions, moving to the cheeks, nose, and chin in 60 seconds total.
- Rinse your face with lukewarm water and rinse the brush head under running water to remove cleanser and debris.
- Pat skin dry with a clean towel and apply toner, serum, and moisturizer as part of your routine.
- If using the exfoliating silicone brush head, limit sessions to 2–3 times per week and follow with sunscreen during the day.
- Switch to the gentle silicone brush head for daily cleansing after exfoliation days.
- Store the device and heads in a dry place. Regularly replace brush heads according to the manufacturer’s guidance.
- Keep the USB charging port dry when charging and disconnect before cleaning the device.
- Consider pairing the PMD Clean Pro with the skin care routine kit for a complete regimen.
Troubleshooting
| Symptom | Likely Cause | Fix | Prevention |
|---|---|---|---|
| Device won’t turn on | Low battery | Charge for at least 2–3 hours; try a different outlet | Keep the device charged between uses |
| Brush head feels loose | Head not attached securely | Detach and reattach firmly until you hear a click | Inspect for wear and replace if necessary |
| Unusual vibration or noise | Debris trapped or head misaligned | Rinse the head thoroughly and reseat it | Clean after every use |
| Skin irritation | Overly aggressive pressure or exfoliation frequency | Use gentler pressure and reduce exfoliation to 1–2 times weekly | Follow product guidelines and adapt to skin type |
Common Mistakes
- Using too much cleanser, which can clog the brush and irritate skin.
- Pressing hard during cleansing, which may cause redness or micro-tears.
- Exfoliating every day when using the exfoliating head, leading to over-exfoliation.
- Not replacing brush heads regularly, reducing effectiveness and hygiene.
Tips For Best Results
- Use lukewarm water to open pores and enhance cleansing effectiveness.
- Incorporate the exfoliating head only a few times per week as part of a balanced routine.
- Follow cleansing with your usual skincare products to improve absorption.
- Clean brush heads after each use to prevent bacteria buildup.
- Charge the device fully and store away from moisture to extend longevity.
Call A Professional
Seek professional advice if you notice persistent skin irritation, severe breakouts, or if you have a skin condition that could be aggravated by cleansing devices. If the device fails to operate after charging and troubleshooting, contact customer support or a licensed esthetician for guidance.
FAQ
How often should I replace PMD Clean Pro brush heads?
Replace brush heads every few months or sooner if the bristles show wear, discoloration, or reduced efficacy.
Can I use the PMD Clean Pro with any cleanser?
Yes, but use a gentle cleanser suitable for your skin type to avoid irritation.
Is the exfoliating head safe for sensitive skin?
Use it sparingly, and discontinue if redness or irritation occurs.
How do I clean the PMD Clean Pro after use?
Rinse the brush head under lukewarm water, pat dry, and wipe the device with a damp cloth; allow it to dry completely before storage.
Buying Guide
When choosing the PMD Clean Pro gear, consider size and ergonomics, noise level, energy efficiency, controls, and placement. Ask yourself how comfortable the device feels in your hand and whether you prefer a USB rechargeable model for travel. Compare the standard brush head versus the exfoliating head for your skin type, and review the compatibility of replacement heads with the unit. Look at bundled options like the PMD Clean Pro skin care routine kit to see if it adds value for your regimen. For most users, a compact, rechargeable device with a soft silicone brush and a dedicated exfoliating head offers a balanced cleanse without harsh friction. If you share the device, ensure it remains hygienic with separate heads and regular replacements. Consider your bathroom layout for storage and whether a waterproof design matters for your routine.